European-style electric hoist with low headroom refers to the FEM standard and DIN standard, combined with 3D object modeling and finite element analysis technology, to further optimize the gear transmission, box structure and the size of each component, so that each component can reach the best value, so as to change its size and save installation space. Using German technology, all key components are imported from the original factory, such as energy-saving motors, safety brakes, load protection clutches, high-strength wear-resistant chains, etc. It has a lot of advantages, such as: 1. The European type electric hoist is light in weight, which can reduce the weight of the workshop or workshop. 2. The European electric hoist can run freely to any part of the industrial site, which increases the area of the project. 3. The height of the European type electric hoist is very small. Because the mechanical structure is different from the layout type, the transmission mechanism adopts a high-speed motor and a hard tooth surface deceleration system, and the small clearance can reach the so-called low clearance, and the lifting height can reach the corresponding height. 4. European electric hoist has the characteristics of high assembly precision, convenient transportation and long service life. 5. The structure of the European-style electric hoist is more compact and more stable. 6. European-style electric hoist is flexible in operation and reliable in performance With its excellent performance and diversified applications, European-style cranes have become the preferred choice in the fields of construction hoisting, machining, stage equipment lifting and other fields.  If you need to improve the driving and operation efficiency, choose the European electric hoist, contact us!

A crane is a mechanical equipment used for hoisting and carrying heavy objects. It is widely used in ports, construction sites, warehouses and other places. Its main components and structure are a precision engineering design. The main components and structure of the industrial crane will be introduced one by one below. Industrial crane mainly includes hoisting mechanism, operating mechanism, luffing mechanism, slewing mechanism and metal structure. The hoisting mechanism is the basic working mechanism of the crane. It is mostly composed of a suspension system and a winch, and some also use a hydraulic system to lift and lower heavy objects. The operating mechanism is used to transport heavy objects longitudinally and horizontally or adjust the working position of the crane. It is generally composed of a motor, reducer, brake and wheel. ​ The luffing mechanism is only equipped on jib-type cranes. The amplitude decreases when the jib is raised and increases when it is lowered. It is divided into two types: balanced luffing and unbalanced luffing. The slewing mechanism is used to rotate the boom and is composed of a driving device and a slewing support device. The metal structure is the skeleton of the crane. The main load-bearing parts such as bridges, booms and gantry can be box structures, truss structures, or web structures, and some can use shaped steel as supporting beams. How many parts does a crane consist of? A Industrial crane is a mechanical equipment used for lifting, transporting and loading and unloading. It generally consists of the following parts: 1. Support system: including machine tools, wheels, legs and foundations, etc., to support and stabilize the crane. 2. Hoisting machinery structure: including main frame, hoisting machinery structure (lifting arm, lifting mechanism, turntable and motor, etc.). 3. Drive system: including motion system and control system. The motion system usually consists of electric motors, hydraulic systems, gears, transmission mechanisms, braking devices, etc. The control system is used to control the movement of the crane. 4. Operation console: including crane operating panel, display screen and controller, etc., used to control and monitor the movement status of the crane. 5. Spreaders: including hooks, clamps, etc., used to connect objects, hoist and carry goods. The above systems are the main parts of the crane, and different types of cranes may contain different specific components. Choosing Dingya crane will bring you professional equipment and improve operating efficiency, we supply high quality overhead bridge cranes and gantry cranes for your needs.

Safety Preparation: Adequate safety preparations must be made before wire rope replacement. First, determine the safety boundaries of the work area and provide the staff with the necessary personal protective equipment, such as hard hats, safety shoes and gloves. Then, make sure the bridge crane is off, cut off the power, and lock it to prevent accidental start. In addition, check and ensure that other related equipment and accessories are in normal condition.   Determine the replacement time: It is very important to choose the appropriate time for wire rope replacement. In general, wire rope replacement can be performed during production downtime or during planned maintenance to minimize disruption to production and work. At the same time, the time and human resources needed for the replacement need to be estimated in advance to ensure the smooth operation of the replacement.   Check the wire rope hoist: Before replacing, the wire rope needs to be carefully inspected. Use professional testing instruments to detect the wear degree, broken wire and whether there are cracks and other problems of the wire rope. If the wire rope is found to have exceeded its service life or to be severely worn and damaged, it must be replaced immediately. Unload the old wire rope: First, professional tools are used to gradually unload the old wire rope from the pulley, reel and hook parts of the overhead crane. In the unloading process, it is necessary to ensure smooth operation and avoid accidents or loose steel wire ropes caused by improper operation. At the same time, clean the unloaded steel wire rope in time to prevent it from causing harm to other staff or equipment.   Install new wire rope: Check the components of the overhead such as pulley and reel to make sure they are in good condition before installing the new wire rope. Then, using a suitable tool, the new wire rope is gradually threaded through the pulley and reel and attached to the hook. In the connection process, pay attention to the correct fixing method and tightening strength to ensure that the connection is firm and reliable.   Debugging and testing: After the wire rope replacement, the corresponding debugging and testing work must be carried out. First, confirm that the installation position of the wire rope is correct, and adjust the corresponding tension and alignment. Then, load experiments and operation tests were performed to verify the normal operation of the overhead crane and the wire rope. If any abnormal conditions or faults are found, they should be repaired and adjusted in time.   Record and maintain: After the wire rope replacement is completed, the relevant replacement records and maintenance information should be recorded. Including the replacement time, replacement reasons, the use of wire rope specifications and models. These records are very important for future maintenance and management, which can help track the usage and maintenance history of the overhead crane, and improve the efficiency and safety of crane management.

Overhead cranes, also known as bridge cranes or EOT cranes, are vital equipment in various industries for heavy lifting and material handling. One crucial aspect of these cranes is their power source, which determines their efficiency, performance, and reliability. Electric-Powered Overhead Cranes The majority of overhead cranes are powered by electricity. These cranes are connected to an electrical power supply through cables or busbars installed on the crane's bridge. Electric-powered overhead cranes offer several advantages, including smooth and precise movements, variable speed control, and ease of maintenance. They are widely used in manufacturing plants, warehouses, and construction sites.   Hydraulic-Powered Overhead Cranes Hydraulic-powered overhead cranes utilize hydraulic systems to generate power for lifting and moving loads. They are commonly found in heavy-duty applications that require high lifting capacities. Although hydraulic cranes offer excellent lifting capabilities, they generally have slower movements compared to electric-powered cranes. They are often used in industries such as steel mills, foundries, and shipyards.   Dual-Powered Overhead Cranes Dual-powered overhead cranes combine both electric and hydraulic systems to provide enhanced performance and versatility. These cranes utilize electric power for precise positioning and hydraulic power for heavy lifting tasks. Dual-powered overhead cranes are suitable for demanding applications that require both speed and strength, such as loading docks and container terminals.   Advantages of DINGYA Factory's Overhead Cranes DINGYA Factory is a leading manufacturer of high-quality overhead cranes, including bridge cranes, overhead cranes, and EOT cranes. Their exceptional products offer numerous advantages for various industries. DINGYA Factory's overhead cranes are built with robust materials, ensuring durability and longevity. With precise engineering and advanced safety features, their cranes provide efficient and safe lifting operations.   DINGYA Factory's Service Excellence Apart from their superior products, DINGYA Factory excels in providing excellent customer service. They offer comprehensive installation, maintenance, and support services to ensure seamless crane operation. With a team of highly trained technicians and engineers, DINGYA Factory prioritizes customer satisfaction and strives to exceed expectations.   In conclusion, the power source of overhead cranes plays a significant role in their performance and efficiency. Electric-powered, hydraulic-powered, and dual-powered cranes offer distinct advantages depending on the specific application requirements. DINGYA Factory stands out as a reliable provider of overhead cranes, delivering exceptional products and excellent service. Choose DINGYA Factory for your overhead crane needs and experience the benefits of superior quality and reliable performance